Description

• Capacity: 3023 mAh
• Max Charge Rate: 5.29A
• Max Charge Voltage: 4.2V
• Continuous Discharge Rate: 39.1A
• Max 80oC | 3.2V cut-off: 49.5A
• Pulse | Peak: 56.4A
• Cycle Life Retention: 500 Cycles (73%), 1000 (64%)
• Chemistry Type: QSP Li-NMC

Extraordinary choice for those that want serious punch in the 21700 worlds, without forfeiting capacity. With it’s QSP Li-NMC formula, these are officially rated at 3023mAh, with a CDR of 39.1A, and 80oC | 3.2V cut-off limit (whichever occurs first) @ 49.5A. All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr (See 1 Below), TID (See 2 Below), PVDL (See 3 Below), CLR (See 4 Below), mΩR (See 5 Below), and Temperature (°C). Hohm RUN is based off the QSP formulation, with chemistry unity process now at a slower mHz (megahertz) to keep costs down while achieving unprecedented capabilities.

Every Hohm Tech cell model has been tested and certified by UN38.3, EN62133, IEC62133 2nd Edition, and UL1642 accredited laboratories and testing facilities assigned by regulatory bodies. This includes MSDS, CE, ROHS, UN38.3, IEC, PSE, Specifications, and Air/Sea Transport certifications. We do not cut corners. We deliver what we promise… chart-topping performance, capacity, consistency, and safety.

To expound on safety:

• modified cathode tag consisting of higher purity aluminum is utilized to aid in lowering internal resistance
• updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled

* NOTICE: Hohm Tech does not manufacture batteries. These are made for and licensed to Hohm Tech Int’l achieving their requirements set forth.
** CAN BE CHARGED AT 4.43A. This is not a misprint. 4.43A as in FOUR POINT FOUR THREE-amp charging is possible, tested, proven, and approved within all strict safety protocols set by Indonesia Chemistry.
*** TESTING BEYOND TEMPERATURE. Hohm Tech cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.
Density Loss Ratio

1. Thermal Image Distribution
2. Pulse Voltage Drop Limitation
3. Cycle Life Retention
4. Resistance Retentivity Pre|Post
5. Pulse & Peak is applicable to Dynamic EV Systems ONLY and rated @ ≤5 SEC ON / ≥30 SEC OFF